Hardware

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

MS35338 split, helical lock washers are made of carbon steel, cadmium plated per QQ-P-416A, Type II, Class 3. They replace the AN935 medium-weight...

Installation hole size for the A-T Series Insert is determined by the parent material's thickness and density. The thicker the material the larger...

Socket Head Cap Screw-Stainless Steel-Undrilled

Individual Airplane Exterior Screw Kits These kits do not include any structural screws.Dimensions: 1.5X3X5

MS21043 Hex Nut, often referred to as jet nuts or reduced hex nuts. Less 20% for quantity 100/Part No.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Ribbed Cruciform 100 Deg Reduced Flat Head, Close Tolerance, Short Thread Material - Cres. (A-286) Heat Treat - 160,000 - 190,000 PSI Finis...

MS21207 Stainless steel 100 Degree Flat Head Type B screws.

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

The AN363 all-metal stop nuts are designed for use in high temp installations (up to 450°F). Fabricated from cadmium plated per spec...

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

Hose and tubing Insert Fittings are available in high density Black Polyethylene or White Nylon. Use polyethylene fittings with Tygon, n...

NAS6605 Shear BoltsThread 5/16-24

Factory New Lycoming Bolts.

Oillite bronze bushings are highly heat resistant, ductile, conformable and corrosion resistant.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

NAS43HT4 Spacers. Material - 4130 Steel Alloy

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...