Hardware

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

ELBOW, Flared Tube, Bulkhead and Universal 45°

These bolts supercede NAS1103 high strength bolts Thread 10-32 For Drilled Shank add "D" at end of .Dimensions: .25X.25X1

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the ...

Due to the large bulbed blind head, similar to a solid rivet, the Cherrylock and CherryMax rivets are especially suited for double dimpled or high...

CAD PLATED FASTENERS ARE NO LONGER AVAILABLE DUE TO ENVIROMENTAL REASONS. *No longer available after our current stock is depleted. Please ord...

Truss Head, Type B Phillips, Stainless

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

Stainless Steel Stop Nut

NIPPLE, Flared Tube and Pipe Thread

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Use these solid brass cap nuts to attach instrument panels to stud-type shock mounts. Give the panel an attractive, finished appearance and do not...

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

MS15795 Flat Material - 300 Series Stainless Steel Finish - Passivate Per Astm A380

Phillips Hex Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 185,000 PSI

These 82 degree flat head machine screws have 55,000psi minimum tensile strength and feature cadmium plate finish per QQ P-416, Type 2, Class 3....

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

Tapered Caplugs can be used as either caps or plugs. Because they are tapered in design and made from highly pliable (or...

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

4002 Series Grommets and Snap Rings