Hardware

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

Marsh Brothers' unique polymer has been used to make the standard spinner washers even better. These washers made from Thordon polymer allow them ...

Factory New Lycoming Bolts.

These bolts supercede NAS1103 high strength bolts Thread 10-32 For Drilled Shank add "D" at end of .Dimensions: .375X.375X1

MS35338 split, helical lock washers are made of carbon steel, cadmium plated per QQ-P-416A, Type II, Class 3. They replace the AN935 medium-weight...

AN174-7A Undrilled Bolt

NAS43HT4 Spacers. Material - 4130 Steel Alloy

Threaded End to Unthreaded Socket End (Female)Dimensions: 1X1X1.75

Due to the large bulbed blind head, similar to a solid rivet, the Cherrylock and CherryMax rivets are especially suited for double dimpled or high...

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

Brass 90° Elbow Hose Adapters 15-04937: Elbow Hose Barb. 90 degree Brass Hose Barb accepts 1/4" id fuel line. 1/4"-npt male pipe thread. 15...

NAS6606 Shear BoltsThread 3/8-24Dimensions: .5X.5X1.5

Screw, Phillips Hex Head Material - A-286 Corrosion Resisting Steel Finish - Passivate Per QQ-P-35

Type: Stud

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Stainless Steel Stop Nut

AN7 Bolts New Surplus.

MIL-SPEC designations for flat washers, NAS620. Covered by military procurement specification FF-W-92 which has, as minimum requirements. 1.Chemic...

The dash number represents the height ("H" dimension) of the spring. EXAMPLE: S3-150 = .150. All Dzus® products are available. Request quote on u...

These bolts supercede NAS1103 high strength bolts Thread 10-32 For Drilled Shank add "D" at end of .Dimensions: .5X.5X1.5

2700 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...