Hardware

MIL-SPEC designations for flat washers, NAS620. Covered by military procurement specification FF-W-92 which has, as minimum requirements. 1.Chemic...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Phillips Hex Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 125,000 - 145,000 PSI

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

AN822 (MS20822) ELBOW, Flared Tube and Pipe Thread, 90°

1568 Series Male NPT Nylon Compression Connector.

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Plug Buttons

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Superior AN932-2 Plug.

ELBOW, Flared Tube Bulkhead and Universal, 90° Dimensions: 1X2X3

82° Oval Head Type A Sheet Metal Screw

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

Used to replace threaded nuts, lock washers, and spanner washers; weigh less than other types of self-locking aircraft fasteners. Can be applied f...

The self-plugging Cherry Blind Rivet is a 2 piece assy. - a hollow rivet and inner member or stem, drawn into or thru the hollow rivet. Ch...

Type: MS51861 Material: Carbon Steel Type 1016 - 1024 Finish: CAD TYPE II (PDF)

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI