Hardware

Zinc-plated Steel (Use slotted screws for antiques)

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt an...

For 1/4" ID tubing without shut-off Used with 11-04066 Quick Disconnect In-line.

(PDF) CAD Plated fasteners are no longer available due to enviromental reasons. ( * ) :No longer available after our current stock is deplete...

Phillips Hex Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 185,000 PSI

Due to the large bulbed blind head, similar to a solid rivet, the Cherrylock and CherryMax rivets are especially suited for double dimpled or high...

AN350 WING NUTS Fabricated from carbon steel and cadmium plated per specification QQ-P416A, Type II, Class 3....

NAS6604 Shear Bolts Thread 1/4-28 For Drilled Shank add "D" at end of .

AN822 (MS20822) ELBOW, Flared Tube and Pipe Thread, 90° Dimensions: .625X1.375X1.5

Series RCL caps are ideal for protecting threaded or smooth cylindrical surfaces. Originally designed for ...

Zinc-Plated, Truss Head Type A (Pointed Tip Screw) & Type B (Blunt Tip Screw).

Heat treated, cadmium plated steel with dry film lubricant applied. Self-locking. Standard temp. to 450º. W at the end of the NAS number indicates...

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .

Riveted or welded in position. Attach access plates, doors or any part that must be fastened securely, yet easily removed with fasteners retain...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

AN503 Fillister Head Screws AN503 (coarse thread) drilled head, slotted fillister head screws are fabricated from steel meeting specification ...

A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required...

Factory New Lycoming Bolts.

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

MS24665 cotter pins are stocked in passivated corrosion resisting stainless steel (formerly AN381) in the priced sizes listed above. Other sizes a...

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...