Hardware

A half grommet does not break easily, and it flattens but guarantees hold of the stud. It is used when protection of the hole is not a considerati...

Type: MS51861 Material: Carbon Steel Type 1016 - 1024 Finish: CAD TYPE II (PDF)

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Type: Stud

These 82 degree flat head machine screws have 55,000psi minimum tensile strength and feature cadmium plate finish per QQ P-416, Type 2, Class 3....

MS24665 cotter pins are stocked in cadmium plated steel (formerly AN380) in the priced sizes listed above. Other sizes available on special order....

Phillips Pan Head Alloy Steel (8740) Finish - Cadmium per QQ-P-416 Tensile - 160,000 - 180,000 PSI

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and ...

Poly-Flo Flareless tube fittings consist of a brass body and nut with brass sleeve. Use with PolyFlo, PVC or Nylaflow pressure tubing. The Pol...

Material - 4130 Alloy Steel Per AMS-S-6758 Finish - Cad Type II, Class 2 Per AMS-QQ-P-416 Heat Treat- 150 KSI Min Per AMS2759 Hardness - 34-...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

Wire clamps for solid wire controls for Cessna Aircraft. Wire clamps are used on solid wire controls including cabin air, mixture control, strain...

NAS517-2-1 Alloy Screw

Phillips Hex Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 125,000 - 145,000 PSI

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

NAS514P1032-4P

(PDF) CAD Plated fasteners are no longer available due to enviromental reasons. ( * ) :No longer available after our current stock is deplete...

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .Dimensions: .5X.5X1

Oillite bronze bushings are highly heat resistant, ductile, conformable and corrosion resistant.