Hardware

Factory New Lycoming Bolts.

NAS514P1032-4P

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

(PDF) CAD Plated fasteners are no longer available due to enviromental reasons. ( * ) :No longer available after our current stock is deplete...

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are ...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

CLoc® 4000 Series Fasteners SK4002S Collared Slot Stainless & SK40S5S Phillips Head Diamond head Stainless Rc 27 Anti-Gall TSO-C148 1050...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut ...

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

The Zenith blind rivets are made from quality alloys, and are batch tested by Zenith Aircraft Company for shear strength before being shipped....

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Manufactured from alloy steel, minimum tensile strength 125,000 PSI. Cadmium plated. Taper: 0.500"/ft. Use with AN975 taper pin washer, AN320 shea...

Manufactured from alloy steel, minimum tensile strength 125,000 PSI. Cadmium plated. Taper: 0.500"/ft. Use with AN975 taper pin washer, AN320 shea...

Type: NAS387 Material: Carbon Steel Type 1016 - 1024 Finish: Nickel Plate (PDF)

These brass elbows and tees provide flexibility in the routing of lines which terminate in male pipe threads.

Size Series: Large Size Head Recess Type: Stud (PDF) (PDF) (PDF)

Marsh Brothers' unique polymer has been used to make the standard spinner washers even better. These washers made from Thordon polymer allow them ...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide