Hardware

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

NAS6606 Shear BoltsThread 3/8-24

ELBOW, Flared Tube Bulkhead and Universal, 90°

Screw Thread Inserts - Self Locking Material - Stainless Steel Per NASM8846 Finish - Plain, Dyed Red Or Dry Film Lube (L) Per AS5272

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

1/2" 100° 600-Piece Screw Pack Flat Phillips AN507C Machine Screws Flat Phillip Sheet Metal Screws 100 6-32 x 1/2 10...

Hose and tubing Insert Fittings are available in high density Black Polyethylene or White Nylon. Use polyethylene fittings with Tygon, n...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt an...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

Screw Thread Inserts - Self Locking Material - Stainless Steel Per NASM8846 Finish - Plain, Dyed Red Or Dry Film Lube (L) Per AS5272

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Factory New Lycoming Bolts.

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

BUSHING, Pipe Thread Reducer

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

AN Nut Couplings

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...