Hardware

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Phillips 82° Flat Head Stainless Steel

Stainless Steel Lock Nut

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 3. AN310 castle nuts are used with drilled-shank bolts, clevis bolts, eye b...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

PDE Series threaded plugs are designed to fit tube and nut assemblies interchangeably. Knurled to aid with finger tightening installation and re...

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

The Rivet Nut is a one-piece internally threaded and counterbored tubular aluminum rivet that can be pulled up or headed while working entirely fr...

(PDF) CAD Plated fasteners are no longer available due to enviromental reasons. ( * ) :No longer available after our current stock is deplete...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Use slotted type for antiques.

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and ...

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

MIL-SPEC designations for flat washers, NAS620. Covered by military procurement specification FF-W-92 which has, as minimum requirements. 1.Chemic...

MS20073/MS20074 Engine Bolts

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...