Hardware

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Coarse Thread - Use brass type for instruments AN340 CAD-PLATED (MS35649) AN340C STAINLESS (MS35649) AN340B BRASS (MS35649) AN340 COARSE...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Stainless Steel Stop Nut

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .Dimensions: .5X.5X1.75

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are ...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Individual Airplane Exterior Screw Kits These kits do not include any structural screws.

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide Drive Type: Phillips

Superior Nuts.

Zinc-Plated, Truss Head Type A (Pointed Tip Screw) & Type B (Blunt Tip Screw).

Due to the large bulbed blind head, similar to a solid rivet, the Cherrylock and CherryMax rivets are especially suited for double dimpled or high...

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

MS20002C5 Counter Sunk Washer to fit size 5/16". Cadmium plated alloy steel.

ECONOMY AN365 NUT PACKS AN365C Nut Kit Stainless AN365 Nut Kit Cad-Plated Qty. P/N Qty. P/N 25 -4-40 50 -4-40 50 -6...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Truss Head, Type B Phillips, Stainless

Hardened steel screws to make permanent fastenings to ferrous and non-ferrous castings, heavy gauge steel,...

Stainless Steel Lock Nut