Hardware

(A, B, L dimensions for AJW are same as for AJ; P, Q, R dimensions given are for wing head) CAD PLATED FASTENERS ARE NO LONGER AVAILABLE DUE TO ...

Type: MS51861 Material: Stainless Steel Type 410 Finish: Passivate (PDF)

Individual Airplane Exterior Screw Kits These kits do not include any structural screws.Dimensions: 1X3X5

Size Series: Large Size Head Recess Type: Stud (PDF) (PDF) (PDF)

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...

Size Series: Large Size Head Recess Type: Stud (PDF) (PDF) (PDF)

Floating for Riveting without Base - This space saving stainless steel receptacle offers optimum weight savings by eliminating base. Floating for ...

NAS6603 Shear BoltsThread 10-32

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

AN924 (Steel) NUT, Flared Tube, Bulkhead and Universal Fitting

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They a...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut ...

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

Use slotted type for antiques.

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the bolt and hold...

CLoc® 4000 Series Fasteners SK4002S Collared Slot Stainless & SK40S5S Phillips Head Diamond head Stainless Rc 27 Anti-Gall TSO-C148 1050...

Truss Head Type A Stainless

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...