Hardware

Factory New Lycoming Bolts.

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

Zinc-Plated, Truss Head Type A (Pointed Tip Screw) & Type B (Blunt Tip Screw).

Material - 4130 Alloy Steel Per AMS-S-6758 Finish - Cad Type II, Class 2 Per AMS-QQ-P-416 Heat Treat- 150 KSI Min Per AMS2759 Hardness - 34-...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

MS15795 Flat Material - 300 Series Stainless Steel Finish - Passivate Per Astm A380

Stainless Steel Material82 DegreeScrew 8X1/2-B-FL-PH SS

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Stainless Steel 10-32 Acorn Nut

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

NIPPLE, Flared Tube and Pipe Thread

For panel installations to eliminate magnetic interference. Brass with black oxide finish.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Elbow, Flared Tube, 90° Dimensions: .437X1X1

MIL-SPEC designations for flat washers, NAS620. Covered by military procurement specification FF-W-92 which has, as minimum requirements. 1.Chemic...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

National Aeronautical Standard Flat NAS1515 series washer. Made out of Plastic Polyhexamethylene Adipamide Overall.

CAD-PLATED COTTER PIN KIT 400 PCS 100 1/16" X 1/2" 50 1/8" X 1" 100 5/64" X 1/2" 25 5/32" X 2" 100 3/32" X 1/2" 25 3/16" X 2"