Hardware

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

DEL fitting seals are designed to eliminate leakage due to scratches on the sealing surface, improper torquing, or poor finishes on tube ends, in ...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Phillips Hex Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 185,000 PSI

Rivet Grip & Diameter Gauge.Dimensions: .125X1X5

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Size Series: Large Size Head Recess Type: Stud (PDF) (PDF) (PDF)

Use with 100° flat head screws to provide reinforced, low-profile attachments. Less 20% Discount o...

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

NIPPLE, Pipe Thread

AN503 Fillister Head Screws AN503 (coarse thread) drilled head, slotted fillister head screws are fabricated from steel meeting specification ...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Material - Alloy Steel (8740) Heat Treat - 160,000 - 180,000 PSI Finish - Cadmium Per QQ-P-416 Type II

NAS6605 Shear BoltsThread 5/16-24

AN365C820 Nut. 1/2"-20 Thread.

Floating for Riveting without Base - This space saving stainless steel receptacle offers optimum weight savings by eliminating base. Floating for ...

Series PD Plugs, designed for use on flared JIC fittings, air knurled for ease of application. They will seal low pressu...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These bolts supercede NAS1106 high strength bolts Thread 3/8-24 For Drilled Shank add "D" at end of .

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...