Hardware

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Adapter for ISS gauges like ISS 2-1/4" Oil Temp Gauge 50-250°F or ISS Oil Temp Sender 240° 5/8 diameter for most Continental / Lycoming eng...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Static dissipative EC Series Cap Plugs provide positive ESD and physical protection for all common sizes of th...

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

(PDF) Economy Fasteners - Similar to Dzus

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They a...

Screw, Phillips Hex Head Material - A-286 Corrosion Resisting Steel Finish - Passivate Per QQ-P-35

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

MS20073/MS20074 Engine BoltsDimensions: .1X.1X2

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Hex Nuts, Small Pattern - NAS671 Material - Carbon Steel Finish - Cad Type IIPer QQ-P-416

AN5 Bolts New Surplus.

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

These pan head machine screws have 55,000 psi minimum tensile strength and are cadmium plated to Specification QQ-P-416, Type 2, Class 3. Manufa...

CLoc® 4000 Series Fasteners SK4002S Collared Slot Stainless & SK40S5S Phillips Head Diamond head Stainless Rc 27 Anti-Gall TSO-C148 1050...

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...