Hardware

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Note: All AN173-AN175 bolts listed are drilled shank. Please contact our sales department by for price and availability of undrilled bolts. No...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

AN840 HOSE NIPPLE, Pipe Thread Dimensions: 1X1X2.5

1,500 Pieces - Stainless Contains 100 each of the following: 6, 8 & 10 AN960C & AN960CL 6, 8 & 10 Nylon ...

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

Note: All AN173-AN175 bolts listed are drilled shank. Please contact our sales department by for price and availability of undrilled bolts. No...

Socket Head Cap Screw-Stainless Steel-Drilled

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

Skybolt Cloc® Receptacles.

A half grommet does not break easily, and it flattens but guarantees hold of the stud. It is used when protection of the hole is not a considerati...

(PDF) CAD Plated fasteners are no longer available due to enviromental reasons. ( * ) :No longer available after our current stock is deplete...

Set screws are used to provide immediate, binding location of various parts on shafts. Maximum h...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

MS35338 split, helical lock washers are made of carbon steel, cadmium plated per QQ-P-416A, Type II, Class 3. They replace the AN935 medium-weight...

Phillips 100° Flat Head Tensile 160,000 180,000 PSI Alloy Steel Per MIL-S-6049 Finish - Cadmium per QQ-P-416, Type II

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide