Hardware

Size Series: Large Size Head Recess Type: Stud (PDF) (PDF) (PDF)

(PDF) CAD Plated fasteners are no longer available due to enviromental reasons. ( * ) :No longer available after our current stock is deplete...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

CLoc® 4000 Series Grommets - Stainless Steel- TSO-C148 Approved.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

1/2" 100° 600-Piece Screw Pack Flat Phillips AN507C Machine Screws Flat Phillip Sheet Metal Screws 100 6-32 x 1/2 10...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Type: Stud

Factory New Lycoming Bolts.

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the ...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

ALUMINUM WELDING FLANGESDimensions: .625X1.75X1.75

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

MS24665 cotter pins are stocked in passivated corrosion resisting stainless steel (formerly AN381) in the priced sizes listed above. Other sizes a...

AN13-23A Bolt New Surplus.

Kit contains Camloc studs, washers, and retainers. Receptacles for Camloc or Southco fasteners are not included. The nose cowl components, if app...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and ...

These snap bushings are ideal for abrasion and cutting protection of wiring, antenna leads, tubing, cables, etc...