Hardware

These snap bushings are ideal for abrasion and cutting protection of wiring, antenna leads, tubing, cables, etc...

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are ...

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

Series RCL caps are ideal for protecting threaded or smooth cylindrical surfaces. Originally designed for ...

These pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength w/cadmium plate finish to QQ-P-416, Type 2, Class 3. MS...

1/2" 100° 600-Piece Screw Pack Flat Phillips AN507C Machine Screws Flat Phillip Sheet Metal Screws 100 6-32 x 1/2 10...

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are ...

CLoc® 4000 Series Retainers - Stainless Steel. Used for installation of the CLoc 4000 Series Fasteners in conjunction with the SK-T26 Installation...

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...

Knurled for ease of application, Series CD caps seal flared JIC fittings exceptionally well against dirt and moisture, as well...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...

MS20073/MS20074 Engine Bolts

Material - Alloy Steel (8740) Heat Treat - 160,000 - 180,000 PSI Finish - Cadmium Per QQ-P-416 Type II

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

MS24665 cotter pins are stocked in passivated corrosion resisting stainless steel (formerly AN381) in the priced sizes listed above. Other sizes a...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some sp...

Use slotted type for antiques.

Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...