Hardware

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required...

Cessna Spacer | Window Brace Bushing - 0711021-12.

NAS43HT4 Spacers. Material - 4130 Steel Alloy

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Static dissipative EC Series Cap Plugs provide positive ESD and physical protection for all common sizes of th...

Avex non-structural blind rivets, with aluminum body and steel stem, are similar to the Cherry BSP and BSC rivets. We stock the standard dome h...

ELBOW, Flared Tube Bulkhead and Universal, 90° Dimensions: .625X1.625X2.175

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength w/cadmium plate finish to QQ-P-416, Type 2, Class 3. MS...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

This is the most powerful plug available and was designed specifically for GA aircraft use. This is about the least expensive thing you can ad...

Material - 4130 Alloy Steel Per AMS-S-6758 Finish - Cad Type II, Class 2 Per AMS-QQ-P-416 Heat Treat- 150 KSI Min Per AMS2759 Hardness - 34-...

These pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength w/cadmium plate finish to QQ-P-416, Type 2, Class 3. MS...

NAS6604 Shear Bolts Thread 1/4-28 For Drilled Shank add "D" at end of .

Cloc® Oil Door Fastener Kits.

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Brass compression fittings to be used with standard or high pressure NSR hose.

22NA27-22-62 Right Angle Flat Anchor Nut 6-32

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Phillips 100° Flat Head Tensile 160,000 180,000 PSI Alloy Steel Per MIL-S-6049 Finish - Cadmium per QQ-P-416, Type II

Material - 4130 Alloy Steel Per AMS-S-6758 Finish - Cad Type II, Class 2 Per AMS-QQ-P-416 Heat Treat- 150 KSI Min Per AMS2759 Hardness - 34-...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...