Hardware

Brass compression fittings to be used with standard or high pressure NSR hose.

22NA27-22-62 Right Angle Flat Anchor Nut 6-32

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Phillips 100° Flat Head Tensile 160,000 180,000 PSI Alloy Steel Per MIL-S-6049 Finish - Cadmium per QQ-P-416, Type II

Material - 4130 Alloy Steel Per AMS-S-6758 Finish - Cad Type II, Class 2 Per AMS-QQ-P-416 Heat Treat- 150 KSI Min Per AMS2759 Hardness - 34-...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Thimble Bushings are a precision molded nylon insert that helps elminate thimble elongation under load to maintain correct cable length and tensio...

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

82° Oval Head Type A Sheet Metal Screw

These bolts supercede NAS1106 high strength bolts Thread 3/8-24 For Drilled Shank add "D" at end of .

AN924 (Aluminum - Anodize Blue) NUT, Flared Tube, Bulkhead and Universal Fitting

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

MS16562 Roll Pins

Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

ELBOW, Flared Tube Bulkhead and Universal, 90°

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

2600 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...

Anchor nuts are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut f...

Size Series: Large Size Head Recess Type: Stud (PDF) (PDF) (PDF)

Hex Nuts, Small Pattern - NAS671 Material - Carbon Steel Finish - Cad Type IIPer QQ-P-416

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...