Hardware

Truss Head, Type B Phillips, Stainless

Truss Head, Type B Phillips, Stainless

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

These brackets can be used in many applications as ultra light structuresDimensions: .625X.75X.75

These bolts supercede NAS1103 high strength bolts Thread 10-32 For Drilled Shank add "D" at end of .

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

MS20073/MS20074 Engine Bolts

The dash number represents the height ("H" dimension) of the spring. EXAMPLE: S3-150 = .150. All Dzus® products are available. Request quote on u...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Anchor nuts are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut f...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...

Hex Nuts, Small Pattern - NAS671 Material - Carbon Steel Finish - Cad Type IIPer QQ-P-416

NIPPLE, Flared Tube and Pipe Thread

Compression crimp fittings are available in both flared and flareless types to mate with (AS4395) and (AS4375) end connections. In addition, el...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Stainless Steel Stop Nut

Superior Quality Panel Fastener Manufacturing since 1982. U.S. Manufacturer & Distributor of the highest grade stainless steel ¼-Turn Panel F...

Socket Head Cap Screw-Stainless Steel-Drilled

Heres an easy way to put steel threads in wood, plastic, or particleboard. Just drill a hole to fit the barrel, insert tee nut, and ...

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...