Hardware

MS35338 split, helical lock washers are made of carbon steel, cadmium plated per QQ-P-416A, Type II, Class 3. They replace the AN935 medium-weight...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hartzell Nuts.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...

NAS514P1032-4P

Truss Head, Type B Phillips, Stainless

NAS6604 Shear Bolts Thread 1/4-28 For Drilled Shank add "D" at end of .

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Stainless Steel Stop Nut

These pan head machine screws have 55,000 psi minimum tensile strength and are cadmium plated to Specification QQ-P-416, Type 2, Class 3. Manufa...

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the bolt and hold...

MIL-SPEC designations for flat washers, NAS620. Covered by military procurement specification FF-W-92 which has, as minimum requirements. 1.Chemic...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

GARDsert® FAA DER approved repair kits contain special high-strength threaded inserts to repair piston, turbine engine cases, airframe and instru...

For panel installations to eliminate magnetic interference. Brass with black oxide finish.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

NAS6606 Shear BoltsThread 3/8-24

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

Compression crimp fittings are available in both flared and flareless types to mate with (AS4395) and (AS4375) end connections. In addition, el...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Factory New Lycoming Bolts.

These bolts supercede NAS1103 high strength bolts Thread 10-32 For Drilled Shank add "D" at end of .Dimensions: .375X.375X1.75