Hardware

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

AN822 (MS20822) ELBOW, Flared Tube and Pipe Thread, 90°

TEE, Flared Tube with Pipe Thread on SideDimensions: .41X.87X1.50

Plug Buttons

Union, Flared Tube Dimensions: .85X.85X1.25

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

MIL-SPEC designations for flat washers, NAS620. Covered by military procurement specification FF-W-92 which has, as minimum requirements. 1.Chemic...

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

MS24665 cotter pins are stocked in passivated corrosion resisting stainless steel (formerly AN381) in the priced sizes listed above. Other sizes a...

Union, Flared Tube Dimensions: .75X.75X1.75

2700 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .Dimensions: .5X.5X.625

Coarse Thread - Use brass type for instruments AN340 CAD-PLATED (MS35649) AN340C STAINLESS (MS35649) AN340B BRASS (MS35649) AN340 COARSE...

ECONOMY AN365 NUT PACKS AN365C Nut Kit Stainless AN365 Nut Kit Cad-Plated Qty. P/N Qty. P/N 25 -4-40 50 -4-40 50 -6...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

AN Nut Couplings

SOUTHCO PUSH-ON RETAINER designed for installation using the retainer tool in "Accessories". SOUTHCO SPLIT RING RETAINER Can be installed by ha...