Hardware

These pan head machine screws have 55,000 psi minimum tensile strength and are cadmium plated to Specification QQ-P-416, Type 2, Class 3. Manufa...

Hex Head, Long Thread NAS6703 & NAS6704 Material - CRES (A286) Per AMS5731, AMS5732, AMS5737 or AMS5853 Finish - Cadmium Per AMS-QQ-P-...

Type: Stud

Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

MS24665 cotter pins are stocked in cadmium plated steel (formerly AN380) in the priced sizes listed above. Other sizes available on special order....

The AN363 all-metal stop nuts are designed for use in high temp installations (up to 450°F). Fabricated from cadmium plated per spec...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and ...

MS24665 cotter pins are stocked in cadmium plated steel (formerly AN380) in the priced sizes listed above. Other sizes available on special order....

Elbow, Flared Tube, 90°

100° Flat Head Type A Phillips, Stainless

Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to...

Stainless Steel Stop Nut

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...

Phillips 82° Flat Head Stainless Steel

Type: Stud

The AN363 all-metal stop nuts are designed for use in high temp installations (up to 450°F). Fabricated from cadmium plated per spec...

Use with 100° flat head screws to provide reinforced, low-profile attachments. Less 20% Discount o...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...