Hardware

These snap bushings are ideal for abrasion and cutting protection of wiring, antenna leads, tubing, cables, etc...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Socket Head Cap Screw-Stainless Steel-Drilled

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

NIPPLE, Flared Tube and Pipe Thread

UNION, Flared Tube Bulkhead and Universal Dimensions: .8X.8X2.75

AN565 Set Screws

These bolts supercede NAS1103 high strength bolts Thread 10-32 For Drilled Shank add "D" at end of .

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .Dimensions: .5X.5X1.875

A half grommet does not break easily, and it flattens but guarantees hold of the stud. It is used when protection of the hole is not a considerati...

DEL fitting seals are designed to eliminate leakage due to scratches on the sealing surface, improper torquing, or poor finishes on tube ends, in ...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Series PDF plugs are designed for easy mechanical or hand installation on flat-faced O-ring fittings.

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide Drive Type: Phillips

Type: MS51861 Material: Carbon Steel Type 1016 - 1024 Finish: CAD TYPE II (PDF)

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Truss Head, Type B Phillips, Stainless

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Stainless Steel Stop Nut