Hardware

MS27151 engine nuts replace AC356 Pal nuts. They are stamped from 1050 spring steel and cadmium plated per QQ-P...

REDUCER, External Thread

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Manufactured to standard castle or shear nut specifications with a nylon insert added for positive safety. Use it throughout the control system. S...

Factory New Lycoming Bolts.

REDUCER, External Thread

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Factory New Lycoming Bolts.Dimensions: .5X.5X5

Factory New Lycoming Bolts.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Series PD Plugs, designed for use on flared JIC fittings, air knurled for ease of application. They will seal low pressu...

Truss Head, Type B Phillips, Stainless

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Hose and tubing Insert Fittings are available in high density Black Polyethylene or White Nylon. Use polyethylene fittings with Tygon, n...

Factory New Lycoming Bolts.

Tapered Caplugs can be used as either caps or plugs. Because they are tapered in design and made from highly pliable (or...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Phillips Pan Head Alloy Steel (8740) Finish - Cadmium per QQ-P-416 Tensile - 160,000 - 180,000 PSI