Skip to content

Hardware

Filters

Bolt Drilled AN3-10

$0.71 - $0.71
$0.71
$0.71 - $0.71
$0.71
in stock

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

View full details
$0.71 - $0.71
$0.71
$0.71 - $0.71
$0.71
Sold out

Dzus Install Tool MS-A5C

$79.87 - $79.87
$79.87
$79.87 - $79.87
$79.87
Out of stock

#5 Oval Grommet Tool. The Dzus® fastener (also branded as Z-SPEC and ZLOC) is the most commonly used quarter-turn fastener in aviation. These t...

View full details
$79.87 - $79.87
$79.87
$79.87 - $79.87
$79.87
Sold out

Planepower - Nut/Washer - New - 74125

$1.71 - $1.71
$1.71
$1.71 - $1.71
$1.71
in stock

Hartzell Nuts.

$1.71 - $1.71
$1.71
$1.71 - $1.71
$1.71
Sold out

Tension Bolts Hex Head Long Thread NAS6704-8

$7.34 - $7.34
$7.34
$7.34 - $7.34
$7.34
Out of stock

Hex Head, Long Thread NAS6703 & NAS6704 Material - CRES (A286) Per AMS5731, AMS5732, AMS5737 or AMS5853 Finish - Cadmium Per AMS-QQ-P-...

View full details
$7.34 - $7.34
$7.34
$7.34 - $7.34
$7.34
Sold out
Sold out

Mcfarlane Kit-0061 Connector Kit 4 Pin Molex

$17.82 - $17.82
$17.82
$17.82 - $17.82
$17.82
Out of stock

AeroLEDs offer high efficiency, direct replacement LED lighting for hundreds of aircraft. AeroLEDs are light weight, shock and vibration resistant...

View full details
$17.82 - $17.82
$17.82
$17.82 - $17.82
$17.82
Sold out

AN929-16 Cap Assembly # 16 Aluminum

$18.90 - $18.90
$18.90
$18.90 - $18.90
$18.90
in stock

CAP, Flared Aluminum Tube Fitting Blanking cap for fitting standard flared tube AN unions.

$18.90 - $18.90
$18.90
$18.90 - $18.90
$18.90

Nut Pal RF516240SOGEQ

$0.51 - $0.51
$0.51
$0.51 - $0.51
$0.51
in stock

MS27151 engine nuts replace AC356 Pal nuts. They are stamped from 1050 spring steel and cadmium plated per QQ-P...

View full details
$0.51 - $0.51
$0.51
$0.51 - $0.51
$0.51

NAS1581C3T2 Offset Screw Flush Reduced

$3.89 - $3.89
$3.89
$3.89 - $3.89
$3.89
in stock

Offset Cruciform 100 Deg Flush Head Material - Alloy Steel (8740) or Cres. (A-286) Heat Treat - 160,000 - 180,000 PSI or 160,000 - 190,000 P...

View full details
$3.89 - $3.89
$3.89
$3.89 - $3.89
$3.89

Floating Anchor Nut MS21059L3

$1.73 - $1.73
$1.73
$1.73 - $1.73
$1.73
in stock

All metal floating anchor nuts. MS21059 ( F5000 ) and MS21061 ( F2000 ). Anchor nuts are designed for blind mounted applications where it is impr...

View full details
$1.73 - $1.73
$1.73
$1.73 - $1.73
$1.73

Stainless Steel Machine Screw MS24693C50

$0.21 - $0.21
$0.21
$0.21 - $0.21
$0.21
in stock

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...

View full details
$0.21 - $0.21
$0.21
$0.21 - $0.21
$0.21

Hex Nut MS21042-L4

$0.64 - $0.64
$0.64
$0.64 - $0.64
$0.64
in stock

The MS21042 all-metal stop nuts are designed for use in high temp installations (up to 450°F). MS21042 nuts are shorter than the A...

View full details
$0.64 - $0.64
$0.64
$0.64 - $0.64
$0.64
Sold out

Hex Nut MS21042-L04

$0.71 - $0.71
$0.71
$0.71 - $0.71
$0.71
Out of stock

The MS21042 all-metal stop nuts are designed for use in high temp installations (up to 450°F). MS21042 nuts are shorter than the A...

View full details
$0.71 - $0.71
$0.71
$0.71 - $0.71
$0.71
Sold out
Sold out

Nut Stop MS21042-08

$0.54 - $0.54
$0.54
$0.54 - $0.54
$0.54
Out of stock

The MS21042 all-metal stop nuts are designed for use in high temp installations (up to 450°F). MS21042 nuts are shorter than the A...

View full details
$0.54 - $0.54
$0.54
$0.54 - $0.54
$0.54
Sold out
Sold out

MS21047L06 Anchor Nut 6-32

$0.65 - $0.65
$0.65
$0.65 - $0.65
$0.65
Out of stock

Anchor nuts are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut f...

View full details
$0.65 - $0.65
$0.65
$0.65 - $0.65
$0.65
Sold out

Nut Castle AN310-4

$2.56 - $2.56
$2.56
$2.56 - $2.56
$2.56
in stock

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 3. AN310 castle nuts are used with drilled-shank bolts, clevis bolts, eye b...

View full details
$2.56 - $2.56
$2.56
$2.56 - $2.56
$2.56

U Type Tinnerman 23919000

$0.55 - $0.55
$0.55
$0.55 - $0.55
$0.55
in stock

$0.55 - $0.55
$0.55
$0.55 - $0.55
$0.55
Sold out

MS24694C50 Stainless Steel Csk Mach Screw

$0.48 - $0.48
$0.48
$0.48 - $0.48
$0.48
Out of stock

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

View full details
$0.48 - $0.48
$0.48
$0.48 - $0.48
$0.48
Sold out
Sold out

MS24694C49 Screw

$0.52 - $0.52
$0.52
$0.52 - $0.52
$0.52
Out of stock

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

View full details
$0.52 - $0.52
$0.52
$0.52 - $0.52
$0.52
Sold out

Nuttwo Lug Anchor MS21069L06

$1.36 - $1.36
$1.36
$1.36 - $1.36
$1.36
in stock

Anchor nuts are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut f...

View full details
$1.36 - $1.36
$1.36
$1.36 - $1.36
$1.36
Sold out

Nut Elastic Stop AN365-720

$1.46 - $1.46
$1.46
$1.46 - $1.46
$1.46
Out of stock

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the ...

View full details
$1.46 - $1.46
$1.46
$1.46 - $1.46
$1.46
Sold out
Sold out

MS21044N10 Elastic Stop Nut

$1.70 - $1.70
$1.70
$1.70 - $1.70
$1.70
Out of stock

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the ...

View full details
$1.70 - $1.70
$1.70
$1.70 - $1.70
$1.70
Sold out
Sold out

Washer Flat AN960-416

$0.13 - $0.13
$0.13
$0.13 - $0.13
$0.13
Out of stock

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt an...

View full details
$0.13 - $0.13
$0.13
$0.13 - $0.13
$0.13
Sold out

Washer Flat AN960-10

$0.11 - $0.11
$0.11
$0.11 - $0.11
$0.11
in stock

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt an...

View full details
$0.11 - $0.11
$0.11
$0.11 - $0.11
$0.11
Sold out

MS21044C3 Stainless Steel Stop Nut

$0.57 - $0.57
$0.57
$0.57 - $0.57
$0.57
Out of stock

Stainless Steel Lock Nut

$0.57 - $0.57
$0.57
$0.57 - $0.57
$0.57
Sold out