Hardware

Hex Head, Short Thread NAS6303 Material - Cres (A286) Per AMS5731, AMS5732, AMS5737 or AMS5853 Finish - Cadmium Per AMS-QQ-P-416 Type II, ...

2600 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...

Hex Head, Short Thread NAS6303 Material - Cres (A286) Per AMS5731, AMS5732, AMS5737 or AMS5853 Finish - Cadmium Per AMS-QQ-P-416 Type II, ...

Offset Flush Mushroom Sets. US Air Tool Company (also known as USATCO) has been a family owned and operated business since 1951. USATCO's fo...

ELBOW, Internal Pipe Thread, 90° Dimensions: 1X1.5X1.5

UNION, Flared Tube Bulkhead and Universal

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are ...

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

Thimble Bushings are a precision molded nylon insert that helps elminate thimble elongation under load to maintain correct cable length and tensio...

Steel set screw with nylon flat point 1/4-28x3/8" Bleeder screw plugDimensions: .25X.25X.5

Azusa steel wheel spacer bushings. 1" O.D.

TEE, Tube with Pipe Thread on Run. Available in Aluminum(D)or Steel. Note: AN826-2 is available in "new surplus" condition only. Dimensions: .43X...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

The SK2003-51ADJ Platemount will accept #82 Southco; 2000 and 4000 Series CLoc® or Camloc® Fasteners common to all Cessna cowlings. One SK2003-5...

ELBOW, Internal and External Pipe Thread, 90°Dimensions: .78X1.3X1.83

These 82 degree flat head machine screws have 55,000psi minimum tensile strength and feature cadmium plate finish per QQ P-416, Type 2, Class 3....

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

1565 Series Union Elbow Nylon Compression Connector.

Offset Flush Mushroom Sets. US Air Tool Company (also known as USATCO) has been a family owned and operated business since 1951. USATCO's fo...

"AD" indicates Hard 2117 aluminum alloy. These rivets are heat treated and have a minimum tensile strength of 38,000 PSI. "A" indicates Soft 100 p...

Type: Stud

Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to...