Hardware

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

Socket Head Cap Screw-Stainless Steel-Drilled

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

Note: All AN173-AN175 bolts listed are drilled shank. Please contact our sales department by for price and availability of undrilled bolts. No...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Screw, Phillips Hex Head Material - A-286 Corrosion Resisting Steel Finish - Passivate Per QQ-P-35

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Individual Airplane Exterior Screw Kits These kits do not include any structural screws.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

NAS517-2-1 Alloy Screw

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Offset Cruciform 100 Deg Flush Head Material - Alloy Steel (8740) or Cres. (A-286) Heat Treat - 160,000 - 180,000 PSI or 160,000 - 190,000 P...

Thimble Bushings are a precision molded nylon insert that helps elminate thimble elongation under load to maintain correct cable length and tensio...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Hex Head, Long Thread NAS6703 & NAS6704 Material - CRES (A286) Per AMS5731, AMS5732, AMS5737 or AMS5853 Finish - Cadmium Per AMS-QQ-P-...

These bolts supercede NAS1103 high strength bolts Thread 10-32 For Drilled Shank add "D" at end of .

Hex Head, Long Thread NAS6703 & NAS6704 Material - CRES (A286) Per AMS5731, AMS5732, AMS5737 or AMS5853 Finish - Cadmium Per AMS-QQ-P-...

AN565 Set ScrewsDimensions: .25X.25X.5

Straight Tube To Male NPT Adapter. Includes compression ferrule for use with 3/16 nylon brake tubing.

Kit contains Southco or Camloc studs, washers, retainers & a push tool for the Southco studs. Receptacles for Camloc or Southco fasteners are ...

Factory New Lycoming Bolts.