Heaters

Install Kit for installing an avionics/cabin heater on most part 23 and 27 aircraft. This kit is intended to install the cabin heater on an A...

C&D 12VDC or 24VDC Fuel Regulators. Additional Core charge applies at time of checkout. Dimensions: 6X6X6

C&D Permanent Magnetic Motor, 24 VDC. Motor, Universal Long-Life 24 VDC, NEW, FAA-PMA REPLACEMENT FOR 07D48, 27D39, 35D49, 55D81, 75D80,...

Tanis Pad Heat Elements.

Expanded on one end to 2" I.D. to slip over a 2" O.D. tube to regulate or shut off air. Also available non-expanded for in-line applications. ...

18 Gauge, 1 conductor - Green (GRN) coated with surface printed . Reference wire specification MIL-W-22759. This wire is commonly used for g...

Tanis Threaded Heat Elements with connectors. Select the right Element for your aircraft with the wide selection of Tanis Replacement Elements.

Harness Connector "Spade style" (blade contact) For replacement only. Used on older TAS100 and TAS300 systems. Used per electrical contact. Hea...

The all stainless steel heater bypass box was conceived while looking at aluminum hardware used for sealing the firewall on experimental aircraft....

Choose this heater to pre-heat the engine compartment of general aviation aircraft. This heater will automatically maintain optimum temperatures f...

This cabin heat box has been engineered to be the smoothest, most efficient and lightest heat box built. Fabricated from aircraft-grade aluminum w...

This box is identical to the standard cabin heat box, P/N DL-001, except that the air intake is parallel to the firewall rather than coming st...

DC Thermals heaters are hand built in the USA with only the very best parts, motors, and wire. The heaters are not constructed of snap together pl...

The all stainless steel heater bypass box was conceived while looking at aluminum hardware used for sealing the firewall on experimental aircraft....

Tanis Pad Heat Elements.

Tanis Preheater installation hardware include washer kits, slotted sockets, fuses, spacers & the much sought after Fireproof Grommets.

Tanis Sealing Plugs for 2 or 3 Pin Connectors.

This is a direct replacement for the VA175 (Vans ). The VA175 directs warm air in the RV-10 tunnel to both sides equally. With the Modified V...

Tanis Pad Heat Elements.

This box was recently developed in response to customer requests. With the exception of brass shaft bushings, this box is constructed en...

Tanis Preheater installation hardware include washer kits, slotted sockets, fuses, spacers & the much sought after Fireproof Grommets.

Solid Pin Contact. Pins and sockets are copper alloy with nickel finish.

With 2" offshoot. If you are running 2.5" tubing in one area and 2" to another, this is your part. Weight is 1.8 ounces.

Solid Pin Contact. Pins and sockets are copper alloy with nickel finish.