Instruments

0-100 psi pressure sender. 1/8" NPTF fitting.Dimensions: 3X3.25X4

The Davtron M850B is FAA Approved as an advanced time-keeping device equivalent and hence a replacement for the sweep-second-hand clocks of old. T...

The model MM-111 probe (type K) is applicable to any type of aircraft exhaust gas temperature indicator that uses type K thermocouple as its elect...

Rotax EGT Gauge for 912UL and 912ULS. 2 1/4" - 300-1000ºC. 57mm - Scale in ºC It works with sensors that come from the factory with Rotax engines.

Probe PN 400509 is a complete assembly using type K thermocouple wire (red/yellow). The sensor port is a standard 5/8-18 thread for bot...

Swift Gauge Ammeters are available in single and dual space saving combination gauges. Size: 2" Round Similar to Falcon Gauge Made in China ...

Alcor 98214 K Type Thermocouple Wire. 22 awg, 7/30 stranded insulated with FEP. Sold in 50 ft packs.

EMS Integra TL-6724 is a multifunctional engine monitoring system integrating all primary engine instruments (Tachometer, Manifold P...

Alcor EGT gauges are aircraft quality gauges which will provide precise monitoring of engine temperatures. PMA/FAA approved. So...

**Note: Cessna probe CHT S2334-3 (06-00703) must be used with the new rochester gauges. Cannot be used with old Stewart Warner gauges.Dimensions:...

EI PT-100GA pressure transducer, 0 - 120 PSI, 1/8" NPT. Dimensions: .67X5.5X8.5

Dynon Avionics servos are dimensionally identical to other leading servos for drop-in upgradability. Behind the scenes, though, the SV line of ser...

Replacement 1/2 IN X 5 IN braided fiberglass sleeves like those furnished with JPI probes.

GAP 26 14V(Regulated Heater) & GAP 26 28V(Heater Not Regulated).

Alcor EGT and CHT 3-1/8" combo gauges are aircraft quality gauges which will provide precise monitoring of engine temperatures....

These are overstock probes for the Westach 2A7 old style gauge. Please contact customer support for application information.Our for the applicabl...

Four (4) very bright LEDs Compact size, just 1.5 long #4 mounting holes 12 or 24 volts Flood type wide area lighting Ideal for map lighting, dome...

RAPCO DRY AIR VACUUM / PRESSURE PUMPS Rapco dry air pumps are FAA-PMA approved direct replacements for Airborne and AA. NEW RAPCO PUMPS are FAA-...

(U) All 1BX (Refer to Image #1) Non-TSO'd Temperature Probes contain a thermistor for temperature sensing. 6" Lead Wires Dimensions: 1.25X2...

Oil Press Sensor 1/4 NPT 0-150 PSI This sensor is mounted to the pressure line using a 6 inch flexible hose and fittings (not supplied)...

Complete engine analyzer kits include CHT gauge, selector switch and probes for each cylinder 6 cylinder engine. Made in USADimensio...

RPM Sensor for BENDIX Series.

Clamp-mounted for leading edge of wing. 14-1/2" long. May be shortened, formed or shaped to best angle of attack. ...