Instruments

For use with all JPI EDM 4 CYL units. 8.5 ft. Note: All 4 CYL units will come with this harness already.

Insight is the world's largest manufacturer of aviation temperature probes. The temperature probe measures the engine's pulse and therefore is cru...

EI MVP Option, High Manifold Pressure, 0 - 70 in. HG.Dimensions: 6X6.5X9.25

Electronics International Primary Volt/Amp Instrument VA-1A-300

Universal mount for many aircraft using a glare shield or deck mount. Models include Beech Baron and Bonanza, Cessna Skyhawk, Skylane and Cardi...

Oil Temp Probe - For Lycoming and Continental engines for use with older GRT EIS models with software versions beginning with 44S--- or 66S---. Pl...

This 90° fitting with 3/8 hose, 1/4" NPT is used in most threaded ports of the flight instruments and is a FAA PMA direct replacement f...

Color tint lamp boots. Sold individually. Changes your instrument backlighting to red for night flying.Dimensions: 1.85X1.85X3

Airpath replacements components for Airpath CompassesDimensions: 2X3X6

The IM-775 instruments have been designed especially to measure the EGT in Rotax® engines 914. The IM-775 is available in 2 1/4" (57mm) diame...

Westach Carburetor Temp Gauge Kit: Provides instant icing check of carburetor. Carb Temp: -50 to 50c. 8/30 VDC. Yellow arc -10C to +10C. 399W...

Bezel for Skysports standard fuel gauge. Comes with 4 of each piece of hardware.Dimensions: .75X2.5X2.5

Monitor your engines vitals with a full line of space saving 1-1/4 engine instruments with 240 degree analog sweep. These instruments allow you th...

UMA indicators are FAA TSO'd to C2d specifications. Installable in a fixed wing aircraft with a reciprocating or Turboprop Engine. Must be install...

Swift Gauge Cylinder Temperature Gauges / Tachometer for dual & single ignition. Dual: CHT/Tachometer Size: 2-1/4" Range: 100-...

1" Square Plate Type Lord Mounts, 6 lb. rating. Monel mounting plate. Base holes .141" dia. for 6-32 screws. Center hole .166" dia. for 8-32 screw...

RAPCO DRY AIR VACUUM / PRESSURE PUMPS Rapco dry air pumps are FAA approved dry air pumps offer quality and performance at a great price. They are...

GEM system CHT spring probe #2852. Insight provides two CHT type of probes. Spring probes which screw into the cylinder head thermowell, and Gaske...

When Tempest receives a core, it is disassembled and all carbon is discarded. They never re-use carbon or the center stator. All parts are replac...

Alcor gauges are aircraft quality gauges which will provide precise monitoring of engine temperatures. PMA/FAA approved. Dimensions: 4X6X6

ALCOR EGT/TIT PROBE GROUNDED, .80 OHM, TYPE K 7/16 * All ring terminals and hardware Dimensions: .5X2.5X6

The Fuel Pressure injected engine 5-32 psi, 1/8 NPT is mounted to the pressure line using a 6 inch flexible hose and fittings (not supplied). Y...

Note: This is the housing only. Does not include compass. Airpath compass housing for top panel mount C2400-L4P.Dimensions: 3X3X4