Instruments
Skyview HDX Panel Mounting Screws QTY 30
Dynon Skyview Hdx Panel Mounting Screws
Precision Overhead Mounting Bracket
Universal overhead bracket kit for customer adaptation.Dimensions: 2.5X3.5X5.75
Aircraft Instrument Cover Inoperative
The instrument cover is a plastic disk approximately 2 3/4 in diameter and 1/16 thick. By use of the attached suction cup, the cov...
View full detailsRC Allen RCA1510-3 Digital Heading Indicator 0 Degree Tilt
Note: Standard tilt is 0 degrees. Made to Order custom tilt option available, part # 10-07138. Option prompt will be offered once base unit is add...
View full detailsCessna CHT Probe S2334-3
**Note: Cessna probe CHT S2334-3 (06-00703) must be used with the new rochester gauges. Cannot be used with old Stewart Warner gauges.Dimensions:...
View full detailsUMA 3-1/8 ASI 40-300 MPH / 250 Knots
These highly accurate Airspeed Indicators use a diaphragm to sense the difference between the pitot pressure and static pressure. Stand...
View full detailsSwift EGT Clamp 32 Type Probe 3/4 TIP 48
10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...
View full detailsUniversal Probe Mount
Works well with plastic and other tank. Includes threaded attachment ring, gasket, and hardware. Standard 5-hole SAE pattern.
Uavionix AV-30-C Certified Primary Flight Display
"Retro-Fit" Your Cockpit with a Digital Upgrade. Upgrade your legacy vacuum-driven instrument to digital precision attitude and direction...
View full detailsAndair Tacho Cap-Lyc ENG Plug
This Tach Cap can be used to close off the tachometer drive of a Lycoming or Continental engine when an electronic tach drive is being used off th...
View full detailsSwift 3-1/8 Engine Tachometer 0-3500 RPM With Hourmeter
Swift 0-3500 RPM Engine Tachometer. Colored dial markings, high accuracy, illuminated pointer. Wide voltage supply range 9-30 VDC, short-circuit p...
View full detailsDynon Skyview Harness Sv-Harness-Adsb FOR SV-ADSB-470/472 Ads-B Receiver
Dimensions: 1X7X8
Westach 2 Round Carb Temp -50-+50C 2C3-1 NON TSO
-50°C to 50°C, Provides instant icing check of carburetor. 8/30 vdc, yellow arc -10C to +10C, For use with 399W sender. 2" Round: 2C3-1 2-14" Sq...
View full detailsSwift 2-1/4 Dual CHT 50-375C / 50-375C
Swift Gauge Cylinder Temperature Gauges work with most 2 cycle 2 cylinder engines. Dual: CHT/CHT Size: 2-1/4" Range: 50-375°C ...
View full detailsWestach CHT Probe J Wire 14MM Ring 4 Lead 712-4WK NON TSO
Non-TSOd fuel quantity indicators available for single or dual tanks. Requires 0-5V capacitance senders (not incl.) Note: Westberg 712 Series Ther...
View full detailsDynon EMS CHT Sensor Bayonet 3/8 UNF LYC Cont
Dynon Avionics engine sensors, harnesses & packages.Dimensions: .5X4.5X4.5
86202 Alcor CHT Probe Gasket
Alcor Multi-Probe Analyzers provide the peace of mind pilots want whether they are flying over mountains, oceans or just around home. By monitorin...
View full detailsSwift 2-1/4 Ammeter 0 - 60A
Swift Gauge Ammeters are available in single and dual space saving combination gauges. Size: 2-1/4" Similar to Falcon Gauge Made in China ...
View full detailsAlcor TCP Dispenser Only
Syringe assembly for TCP Fuel Treatment.Dimensions: 1.5X2X6
UMA Tachometer Pickup FOR Slick MAG 6 Lead
1A3-4 UMA Sending Unit Includes: Sending Unit, and .156 dia. tang adapter. Dimensions: 4.5" overall length, 1.3" max. ...
View full detailsPrecision Pacmo Early Cessna 172 182 Mounting Bracket
Note: Compass not included. Cessna early 172, 182 with compass mounted on windshield with 1" center with 1" divider strip.Dimensions: 3.375X4.1...
View full detailsEI P-101 CHT Replacement Probe Bayonet Type
CHT Probe, Military Bayonet Type, 1/4 turn locking for quick removal, To be used with the A-101 Adaptor, 700 Degrees Fahrenheit Max. Dimensions: ....
View full detailsJPI FS 450M Twin Engine 3-1/8 201 Transducer
The Aviation Consumer, Product of the Year. JPIs FS-450 is top choice because it has all the options you need for fuel management. Available ...
View full detailsWestach 155-22B Small Bullet
Bullets are used to connect sockets and sleeves together on the back of Westach instruments.Dimensions: .125X.125X.5