Instruments
Filters
Fuel Probe 12V 12IN 5BND
The probe is constructed of concentric tubing (a small tube inside a larger tube). The tubes, which are separated by small insulators to keep the...
View full detailsMitchell Fuel Gauge 0-30
Fuel Quantity Gauge 2-1/4" D1-211-5076 Replacement Gauge (Uses existing sender: 0-30 Ohm) Dimensions: 3X3X3
Westach Temp Probe 10X1.5MM THD 4 Lead 5/8 TIP NON TSO
399S10-1.5S Temperature sender 10X1.5mm thread, 5/8" tip, 4' lead, with crush washer 1,750 ohms @ 100F Made in USADimensions: .85X2...
View full detailsSwift 12MM CHT Sender
Swift CHT sender, 12mm dia. ring, 4ft metal shield wire. Similar to Falcon Gauge Made in China Dimensions: 1X4X4
AA1K9-6-10 Tempest Fitting 45*
Tempest fittings are FAA-PMA approved and are specifically designed to reduce pressure drop and improve pneumatic system performance. The fit...
View full detailsAA1K8-6-8 Tempest Fitting 120*
Tempest fittings are FAA-PMA approved and are specifically designed to reduce pressure drop and improve pneumatic system performance. The fit...
View full detailsDynon CHT Sensor Ring Terminal 12MM Jabiru
Dynon Avionics engine sensors, harnesses & packages.Dimensions: 1X3X4
Resistance Bulb MS28034-1
Oil Temperature Gauges. Resistance bulb.Dimensions: 1.125X1.125X8.75
Reducer Plate ( 2-1/4 TO 2 )
Reduce from 2.25 to 2 diameter instrument. For oil pressure, ammeter gauge etc.Dimensions: .25X2.75X2.75
JPI EDM Option OIL Press Sender With Harness
JPI EDM option, oil press sender with harness.Dimensions: 2X2X3.5
MK Alignment Mounting PIN
Alignment guide pin for Instrument Mounting Kits. Dimensions: .25X5X5
UMA 2-1/4 ASI 40-200 MPH TSO
UMA indicators are FAA TSO'd to C2d specifications. Installable in a fixed wing aircraft with a reciprocating or Turboprop Engine. Must be install...
View full detailsUMA 2-1/4. Electric Tachometer 0-3500 RPM Slick 4C Sender NON TSO
These 2-1/4" tachometers were designed to offer aviation styling and performance for all types of aircraft. These tachs have high resolution and e...
View full detailsAE Fuel Guardian TWO Sensors
The AE Fuel Guardian provides you with a little extra insurance. Dont be a NO fuel statistic. As simple as it seems to keep an eye on y...
View full detailsRapco Fitting RA1K8-6-10
This 152° fitting with 5/8" hose and 3/8" NPT is used in most outlet threaded ports of 200 & 240 series vacuum pumps or aircr...
View full detailsUMA 2-1/4 Electric Tachometer 0-3500 RPM W/ Sender 6 NON TSO
These 2-1/4" tachometers were designed to offer aviation styling and performance for all types of aircraft. These tachs have high resolution and e...
View full detailsReducer From 3ATI TO 2 1/4 INS
3ATI Reducers to 3 1/8" 3ATI Reducers make it possible to use a 3ATI hole cut out to mount 3 1/8'' diameter instruments. One reducer plate bolt...
View full detailsOperating Range Vinyl Decals
Yellow, red, green and white, pressure sensitive. Just pull off backing and place on instrument lens. Dimensions: .031X3X3.5
JPI EDM Manifold Press Sensor 0-60IN 1/8 NPT 604010 TSO
For manifold pressure monitoring 0 - 60 inches of Hg. 1/8NPTDimensions: .5X1.5X3
Mitchell Temp Sender 5/8 250F
Mitchell temperature sender 5/8 - 18 UNF Thread 250F degrees (FAA/PMA).Dimensions: .75X2.25X2.75
Davtron Model 655-2 O.A.T. C & F/ Pressure & Density Alt/ DC Voltage Rear Mount Temp. Probe Included Voltage & Deviation Alarm
Davtron M655 Features: 2 1/4" standard mount or front mount Outside air temperature (°f) Outside air temperature (°c) Pressure altitude ...
View full detailsRadiant Fuel Gauge FOR Resistive OR Float Based Fuel
Radiant Fuel Gauge For Resistive or Float Based Fuel- Gen 2 The GEN-2 Radiant Fuel Guage is designed to work with either one or two industr...
View full detailsRadiant Fuel Gauge FOR Capacitive Fuel Senders 0-5 Volt
Radiant Fuel Gauge For Capacitive Fuel Senders 0-5 Volt Gen-2 The Radiant Fuel Gauge is designed to work with either one or two industry stand...
View full detailsInsight RPM Lead Cable 8FT
Accessories and probes for Insight Graphic Engine Monitors.