Instruments

Quartz Hour Meter 12-40V

Probe for the measurement of the temperature of exhaust (EGT) for all ROTAX engines. It has a thread metric 8 and it can be installed directly on ...

Sigma-Tek 5000 Series Lamp Trays, available for both 14 or 28 volt. Lighted Instruments do NOT include lamp trays, these must be purchased s...

Rapco FAA-PMA approved filter replacements for Airborne assemblies. Destructive contamination abounds within an aircraft environment. ...

The 4000B is our standard air-driven directional gyro. As the aircraft turns left or right, gears on the sensing unit and dial shaft translate t...

The UMA EL (Electroluminescent) Light Bezel System replaces instrument post-lights, and is not just a supplemental lighting system. Our system pro...

Superior to any other type of pyrometer available. Unlike com­pet­ing brands, these units are temperature com­pen­sat­ed. That is, wh...

RAPCO DRY AIR VACUUM / PRESSURE PUMPS Rapco dry air pumps are FAA approved dry air pumps offer quality and performance at a great price. They are...

The A200-TSA is a monolithic temperature sensor with on-chip signal conditioning and an operating temperature of -50°C to 150°C. It has an accurac...

Airpath replacements components for Airpath Compasses

Multiple servos models are available to suit different aircraft control force requirements. The SV32 is rated at 36 in-lb of torque and the SV42 a...

The gauge are not temperature compensated; changes in ambient temperature will affect the readings. Unlike our MICRO-1000 gauges, It will require ...

A venturi is a relatively low cost means of producing the vacuum to operate gyroscopic instruments (turn/bank, directional ...

The Cylinder Head Temperature (CHT) - Tanis Adapter (Piggy Back) - probe, is installed in coalition with the Tanis Heating System. The CHT adapt...

Swift Gauge Cylinder Temperature / Exhaust Gas Temperature Gauge work with most 2 cycle 2 cylinder engines. Dual: CHT/EGT Size: 2" ...

0-100 psi pressure sender. 1/8" NPTF fitting.Dimensions: 3X3.25X4

Monitor engine's vitals with a full line of space saving 1-1/4" instruments with 240º analog sweep.The Instruments allow you the opportunity to ut...

The Davtron M850B is FAA Approved as an advanced time-keeping device equivalent and hence a replacement for the sweep-second-hand clocks of old. T...

Note: Lighting on lighted versions is blue/white. The SIRS "Navigator" delivers extremely accurate readings due to its fully integrated, 4 magne...

The model MM-111 probe (type K) is applicable to any type of aircraft exhaust gas temperature indicator that uses type K thermocouple as its elect...

Multiple servos models are available to suit different aircraft control force requirements. The SV32 is rated at 36 in-lb of torque and the SV42 a...

Rotax EGT Gauge for 912UL and 912ULS. 2 1/4" - 300-1000ºC. 57mm - Scale in ºC It works with sensors that come from the factory with Rotax engines.

Insight is the world's largest manufacturer of aviation temperature probes. The temperature probe measures the engine's pulse and therefo...

Probe PN 400509 is a complete assembly using type K thermocouple wire (red/yellow). The sensor port is a standard 5/8-18 thread for bot...