Microphones

Housing for mic or phone jack 1-Predrilled hole to be surface mounted. Can be mounted with 4 small screws on outer flang (Flange NOT predr...

Metal housing available in Powdercoat finish, 2-hole .380 w/key, can be used on mic & phone jacks, intercoms, fuses, switches etc. Can moun...

Bracket- (4) hole horizontal for either Mic or Phone Dimensions- 4.5w x 1.5h x 1.0 deep (4) Holes .380 dia. x 1.0 between centers Weight: 2...

Microphone with built-in speaker and front panel includes up/down buttons and two programmable buttons (P1/P2).

Oregon Aero MicMuff® Microphone Cover for military dynamic (M-87) microphones. Microphone not included. The MicMuff® Microphone Cover must be...

If panel space is scarce or you'd prefer to locate your headphone jacks in a more convenient spot, this housing is perfect. Mounts flush to any fl...

If panel space is scarce or you'd prefer to locate your headphone jacks in a more convenient spot, this housing is perfect. Mounts flush to any fl...

This Retrofit Kit allows you to upgrade your older model H10- Series aviation headset (H10-40, H10-30 etc..) microphones with M-7/DC Amplified E...

This versatile mic and phone jack housing has a powder coat finish. With this recessed housing in place in a side panel, your jacks are out of the...

Now available for aviation helmets the David Clark patented combination flex/wire boom allow for easy, perfect microphone positioning. Each kit is...

Metal housing available in Powdercoat finish, 2-hole .380 w/key, can be used on mic & phone jacks, intercoms, fuses, switches etc. Can moun...

Dynamic, noise-cancelling, hand-held microphone. Built-in amplifier adjustable for full transmitter output. Meets sp...

Any headsets using M-87 Microphones (usually the mics in helmets such as Gentex or Gallet)Dimensions: 1X1X2.25

Comtronics leather windscreen 5204 for Comtronic headset mics.Dimensions: .5X2X2.75

If panel space is scarce or you'd prefer to locate your headphone jacks in a more convenient spot, this housing is perfect. Mounts flush to any fl...

Metal housing available in raw Aluminum, Black or Beige. Designed to be utilized with the BOSE 6 Pin Lemo Jack #323172-0010 Can mount with (4) ...

S-267 - PJ-068 .206 mic plug. Mates with JJ-033, S-12B, CES830. .206" 3-conductor Plug, Solder Lug & Cable Clamp terminals, black handle

This versatile mic and phone jack housing has a powder coat finish. With this recessed housing in place in a side panel, your jacks are out of the...

The Model M-7A is an Electret, noise-cancelling microphone designed to operate in place of carbon and amplified dynamic microphones. Provides clea...

Used in an open cockpit. Foam microphone windshield for use with all Lynx headsets.Dimensions: 3X7X10

The MicMuff® Microphone Cover lets a noise-canceling microphone do its job above 97dB. Eliminates ambient cockpit noise and noise from radios and ...

Flightcom: 4DX, 5DX. Skycom H-40A, h-80A. Sigtronics: S-68, S-20. Peltor LE Sport, 7004, 7104. Telex: Stratus, ANR 150. David Clark: H 10-40, H-10...

The iCOM HM-176 is the compatable microphone for the A210 A200 PS80 Works best with the A210 Air band panel mount transceiver with intercom ...

Modified to allow plugs to enter from the opposite side, being recessed they are out of the way. When jacks are plugged in they are flush with the...