Seals

Hylomar Aerograde is a highly engineered, non-setting and non-hardening gasketing compound for use in the aeronautical industry with a wide oper...

Superior SA641607 Push Rod Housing Seal for Continental. FAA/PMA

A non-hardening, heavy-bodied, pliable sealant for semi-permanent assemblies. Use on threaded assemblies, over plates and hose connections, metal-...

Slow-drying, non-hardening brush-top sealant approved for use in aviation as well as automotive applications. Temperature range -65°F to 400°F (-...

Piper Air Filter Seal 486-389

Seals & repairs wide range of gaskets. Fills in uneven flange surfaces. Seals pipe fittings, air ducts, boilers, plumbing connections & th...

Harztell Seals.

Henkel Loctite 515 Gasket Eliminator is a high viscosity, flexible sealant for use on rigid machined flanges. It provides resistance to low pr...

Harztell Seals.

These seals from Real Gasket Corp. provide 37% more sealing area at the point of contact with the pushrod tube, and vector spring pressure by its ...

LOCTITE® High Temperature Gasket Sealant is a slow drying viscous paste. It remains pliable and flexible and is designed to seal flanges, threaded...

These kits from Real Gasket Corp replace problematic pushrod tubes of continental engine models: A-65, A-75, C-75/85/90/125/145,...

Cont. #21477 for A-65 thru 0-200 Dimensions: .125X2.5X2.5

These kits from Real Gasket Corp replace problematic pushrod tubes of continental engine models: A-65, A-75, C-75/85/90/125/145,...

Superior Seal SA536410 for Continental Push Rod Housing. FAA/PMA

Dimensions: .375X.75X.75

Plug, 2.00 dia. expansion. STD-1211 Plug is called out in blue in the diagram to the left. Dimensions...

Superior Continental - SA632248 FAA/PMA

These seals from Real Gasket Corp. provide 37% more sealing area at the point of contact with the pushrod tube, and vector spring pressure by its ...

Dimensions: .26X1X1

Crank Oil Seals - Continental #530019 for A-65 thru 0-200, Flanged ShaftDimensions: .5X3.25X3.25

Crankshaft seal (molded lip on outside surface - solid type - three grooves for glue retention)Dimensions: .5X3.5X3.5

Ring-Oil Seal-.090 X 4" Diameter Dimensions: .25X2.5X2.5

Crank Oil Seals - Continental #24321 for A-65 and C-85, Taper Shaft.Dimensions: .25X3X3