Tailwheels
Filters
Maule Tail Tire W/ Bear TW-23A
DESCRIPTION TYPE PN 6.50 x 2.50 SOLID TIRE Maule P/N 23 for Model SFSA tailwheels. Tire with out Bearings (TW-23) ...
View full detailsMaule Tire 6.50 X 2.50 # TW-23
DESCRIPTION TYPE PN 6.50 x 2.50 SOLID TIRE Maule P/N 23 for Model SFSA tailwheels. Tire with out Bearings (TW-23) ...
View full detailsScott Type Grease Retainer U1863A
The Model 2600 8" pneumatic tire and wheel assembly is used on the 3200, 3250, 3400 and 3425 Series tailwheel assemblies. The Model 3245-1 10"...
View full detailsA-501-2A-521 LNG Pinnutwshr
Photo identifies parts with below numbers as represented: 1-Castellated Nut 2-Washer 3-Driving Cap 4-Wheel Arm 5-Plunger Spring 6-Plunger Pi...
View full detailsLang Attaching Bracket Assembly
Photo identifies parts with below numbers as represented: 1-Castellated Nut 2-Washer 3-Driving Cap 4-Wheel Arm 5-Plunger Spring 6-Plunger Pi...
View full detailsLang Tailwheel Driving CAP Assy
Photo identifies parts with below numbers as represented: 1-Castellated Nut 2-Washer 3-Driving Cap 4-Wheel Arm 5-Plunger Spring 6-Plunger Pi...
View full detailsTailwheel 8 3.5 Wide Tire
Matco tailwheels use a fiberglass reinforced nylon wheel with an operating load of 450 lbs. It takes over 5000 lbs to fail the wheel and it will h...
View full detailsABI-800613 2 Hole Bracket Assy
The Scott Model 3200 tailwheel, with 8" pneumatic tire, is designed to give years of trouble-free service. The swivel mechanism is sealed to keep ...
View full detailsABI 3256-1 Lower Duct Cover Bent ARM
The Alaskan Bushwheel 3200 Tailwheel Assembly Replacement PartsDimensions: .25X3X3
ABI Spacer 2504-1
The Alaskan Bushwheel 3200 Tailwheel Assembly Replacement Parts
ABI 3216-00 1 Hole Bracket Assy
The Alaskan Bushwheel 3200 Tailwheel Assembly Replacement PartsDimensions: 3X5X5
Lang Tailwheel # D-501A
Lang Tailwheel AssembliesDimensions: 7X7X12
ABI Long Pawl 3200-ABI-3219-02
The Alaskan Bushwheel 3200 Tailwheel Assembly Replacement Parts
Matco Pneu Tailwheel WHLT-8D
The T-8D tail wheel utilizes a dual fork configuration and incorporates a geometric release mechanism that allows the wheel to caster after reachi...
View full detailsABI-3411-07 Upper Dust CAP
The Alaskan Bushwheel Tailwheel Assembly is an FAA-PMA (PMA # PQ1557NM, Supplement 9) Replacement part for the Scott 3200 assembly and part...
View full detailsABI RIM Spacer S2
The Alaskan Bushwheel Tailwheel Assembly is an FAA-PMA (PMA # PQ1557NM, Supplement 9) Replacement part for the Scott 3200 assembly and part...
View full detailsABI Axle Bolt 872
The Alaskan Bushwheel Tailwheel Assembly is an FAA-PMA (PMA # PQ1557NM, Supplement 9) Replacement part for the Scott 3200 assembly and part...
View full detailsABI NUT 3400-AN320-8
The Alaskan Bushwheel Tailwheel Assembly is an FAA-PMA (PMA # PQ1557NM, Supplement 9) Replacement part for the Scott 3200 assembly and part...
View full detailsMaule Lock Ring TW-57
Dimensions: .5X1.125X1.125
Maule Lock Ring TW-57
Dimensions: .5X1.125X1.125
Matco 6 Nose Wheel
MATCO mfg produces the WHLTW35 inch nosewheel for use with aircraft requiring less than 660 pounds nosewheel load. Dimensions The WHLTW35 uses 0....
View full detailsMaule Tailwheel TW-64 Washer
Old Style (Pre 1976) has 3/4" Fork Shaft (SFS-P8 Pneumatic or SFS Solid Rubber) & New Style (Post 1976) has 7/8" Fork Shaft (SFS-P8A P...
View full detailsLang 19 Kloser Spacer A-546
Photo identifies parts with below numbers as represented: 1-Castellated Nut 2-Washer 3-Driving Cap 4-Wheel Arm 5-Plunger Spring 6-Plunger Pi...
View full detailsScott Type ARM Assy
The Scott Model 3200 tailwheel, with 8" pneumatic tire, is designed to give years of trouble-free service. The swivel mechanism is sealed to keep ...
View full details