Tailwheels

The T-8LD tail wheel utilizes a dual fork configuration and incorporates a geometric release mechanism that allows the wheel to caster after reach...

The Scott Model 3200 tailwheel, with 8" pneumatic tire, is designed to give years of trouble-free service. The swivel mechanism is sealed to keep ...

The Alaskan Bushwheel 3200 Tailwheel Assembly Replacement Parts

8" Standard tailwheel is assembled with 2.80" x 2.50" x 4" tire. Each assembly is greased and ready for installation. FAA-PMA direct replacem...

ABI-3224A Alaskan Bushwheel Tailwheel Assembly. Replacement part for the Scott 3200A. FAA-PMA # PQ1557NM. The difference between the 3200 and 3224...

The Scott Model 3200 tailwheel, with 8" pneumatic tire, is designed to give years of trouble-free service. The swivel mechanism is sealed to keep ...

The Scott Model 2000 tailwheel (formerly Model 3-24B), with 6" solid rubber tire is steerable, with full-swivel capability. Attaching bracket acco...

The Scott Model 3200 tailwheel, with 8" pneumatic tire, is designed to give years of trouble-free service. The swivel mechanism is sealed to keep ...

The T-8WD tail wheel utilizes a dual fork configuration and incorporates a geometric release mechanism that allows the wheel to caster after reach...

The Alaskan Bushwheel 3200 Tailwheel Assembly Replacement PartsDimensions: 1.5X3X7.25

The Alaskan Bushwheel 3200 Tailwheel Assembly Replacement Parts

The Scott Model 3200 tailwheel, with 8" pneumatic tire, is designed to give years of trouble-free service. The swivel mechanism is sealed to keep ...

The Alaskan Bushwheel 3200 Tailwheel Assembly Replacement PartsDimensions: .125X1.5X1.5

1-Castellated Nut 2-Washer 3-Driving Cap 4-Wheel Arm 5-Plunger Spring 6-Plunger Pin 7-Arm Driving Pin 8-Driving Washer 9-Attaching Bracket...

Alaskan Bushwheel and Cleveland part compatible with Cleveland ABI 6" Wheel Assembly 40-60 and 40-75T.

1-Castellated Nut 2-Washer 3-Driving Cap 4-Wheel Arm 5-Plunger Spring 6-Plunger Pin 7-Arm Driving Pin 8-Driving Washer 9-Attaching Bracket...

The Scott Model 2000 tailwheel (formerly Model 3-24B), with 6" solid rubber tire is steerable, with full-swivel capability. Attaching bracket acco...

Old Style (Pre 1976) has 3/4" Fork Shaft (SFS-P8 Pneumatic or SFS Solid Rubber) & New Style (Post 1976) has 7/8" Fork Shaft (SFS-P8A P...

Old Style (Pre 1976) has 3/4" Fork Shaft (SFS-P8 Pneumatic or SFS Solid Rubber) & New Style (Post 1976) has 7/8" Fork Shaft (SFS-P8A P...

Old Style (Pre 1976) has 3/4" Fork Shaft (SFS-P8 Pneumatic or SFS Solid Rubber) & New Style (Post 1976) has 7/8" Fork Shaft (SFS-P8A P...

Matco tailwheels use a fiberglass reinforced nylon wheel with an operating load of 450 lbs. It takes over 5000 lbs to fail the wheel and it will h...

The Model 2600 8" pneumatic tire and wheel assembly is used on the 3200, 3250, 3400 and 3425 Series tailwheel assemblies. The Model 3245-1 10"...

The Model 2600 8" pneumatic tire and wheel assembly is used on the 3200, 3250, 3400 and 3425 Series tailwheel assemblies. The Model 3245-1 10"...

Replacement wheels with tires and bearings for the Homebuilder's tailwheels. Natural Rubber R&K only utilizes the highest quality natural r...