Anti-Splat Exhaust Heat Shield System 12LNGTH .5-1.25DIA

Heat Shield system is very easy to install and can be tailored to your specific needs and application, to control reflected heat in your engine compartment. These block, and control unwanted radiated heat from hot exhaust tubing, thus protecting your cowl and engine accessories from destructive high temperatures. They are held fast in place, approximately ¼ off the hot surfaces with hose clamps around the pipes, or to the specific accessories, hose, line, tubes or item you wish to protect. Unlike most products in this category, they will not shake off or crack in a few hours. The attach brackets are made from .062 14 ga. 301 stainless steel and will outlast your aircraft. The aluminum heat shields are 6061-T6 .032 pre-punched with properly spaced mounting and ventilation holes every one inch. This makes custom trimming and fitting to your needs very simple. The attach brackets can be fitted to the shields with .125 squeeze rivets, or you can use .125 stainless pop rivets with steel pull pins via the pre-punched holes. These heat shields are available in 4/6/12 lengths, and you can specify the tubing size you are going to mount to for proper clamp sizing.

Dimensions: 3X3X13