Cable Assemblies

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

Dimensions: .1875X.1875X3.5

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

These Zinc plated steel terminals are manufactured to AN specifications, with either right-hand or left-hand threads. Example: P/N AN665-10L has a...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

NAS1435 Eye Fork Military grade

Dimensions: .1875X.1875X3.5

If military grade is required, please order

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Swivel Fittings and Studs (Bug Nuts) for Piper Aircraft Vast eligibility with multiple applications Heat-treated stainless steel Improved c...

If military grade is required, please order Dimensions: .29X.38X1.27

Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened a...

KIT INCLUDES AN146-8S -MS21260-S2LH CABLE SWAGE END -AN155-8S TURNBUCKLE BARREL -AN161-8RS TURNBUCKLE FORK ...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

U70371-000 Piper Cable Swivel Fitting - Cabin Heat FAA/PMA approved Supercedes s 70371-000, 70371-00

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or...

These control cables are pre-stretched for closer tolerance applications and to reduce stretching following installation. The major difference bet...