Turnbuckles
Filters
3/32 Cable Stud MS21260-L3LH
Dimensions: .25X.25X3.75
MS21252-6LS Fork (Turnbuckle 3/16)
Turnbuckle Fork MS21252 Series.
Turnbuckle Assembly AN150-46L
Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....
View full detailsTurnbuckle Assembly AN150-22L
Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....
View full detailsTurnbuckle Assembly AN140-61L
Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....
View full detailsTurnbuckle Assembly AN135-32S
Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....
View full detailsTurnbuckle Assembly AN130-61L
Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....
View full detailsTurnbuckle PIN EYE AN165-46RS
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...
View full detailsTurnbuckle PIN EYE AN165-32RS
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...
View full detailsTurnbuckle PIN EYE AN165-32LS
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...
View full detailsTurnbuckle Fork AN161-80LL
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...
View full detailsTurnbuckle Fork AN161-61RL
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...
View full detailsTurnbuckle Fork AN161-46RL
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...
View full detailsCable EYE AN170-8RS
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicate...
View full detailsCable EYE AN170-61LL
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicate...
View full detailsCable EYE AN170-32RL
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicate...
View full detailsEcon Turnbuckle Wrench Tool
Turnbuckle Wrench 2 inch diameter turnbuckle wrench easily rotates turnbuckle while chain tool holds the cable ends in precise alignment and...
View full detailsTurnbuckle PIN EYE AN165-22LL
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or...
View full detailsCable Swage END MS21260-S4RH
Cable EYE MS21255-2RL
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...
View full detailsFork END MS21252-4LL
Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...
View full detailsCable Swage END MS21260-L3RH
Dimensions: .25X.25X3.75
Cable EYE AN170-46RL
The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...
View full detailsCable EYE SS MS21255-C2LS
Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...
View full details