Cable Assemblies

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened a...

The BA3 Series of plain ball end fittings meet all requirements for Boeings BACT14B Plain Ball End Fittings and NAS494 series Plain Ball End Fitti...

Made of cadmium plated steel or stainless steel per procurement specification MIL T-5677. Used to form sturdy eye end on control cable. Form cable...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The MS21259 series stud end fittings are manufactured from stainless steel to the strict standards of MS21259. They are certified to the MS21259 s...

Injection molded ABS plastic fairings used to cover hole in airframe where control cables emerge such as the rudder cables at ...

Dimensions: .25X.25X.5

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Made of 303SE Stainless Steel. Used in same manner as AN100 cable thimble.

Nicopress swages Material: Tin

Wire Stop is ideal for securing cable ends. Removable and completely reusable. OD 1/4" ID 8-32 Length 3/8" for cable up to 3/32"

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

The MS20667 Fork End Fittings are manufactured from stainless steel in accordance with the requirements of MIL-DTL-781 and are certified to those ...

These control cables are pre-stretched for closer tolerance applications and to reduce stretching following installation. The major difference bet...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or...

OD ID LENGTH CABLE DIA. MATERIAL PART NO. 1/4 8-32 .240" 3/32 Max. Steel 2361 Dimensions:...

Giga Flight Laser-Markable Arinc 429 Cable GF70-24A429