Cable Assemblies

These Zinc plated steel terminals are manufactured to AN specifications, with either right-hand or left-hand threads. Example: P/N AN665-10L has a...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

SS Rigid Eye Snaps Diameter Stock 7/16 Overall Length 4 3/4 Snap Opening 7/8 Tensile Strength lbs. 2500

Made of cadmium plated steel or stainless steel per procurement specification MIL T-5677. Used to form sturdy eye end on control cable. Form cable...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

NAS1435 Eye Fork Military grade

These copper stop sleeves are used on the ends of bare cables. When properly applied with Locoloc® Hand Swager to bare cable on 3x7, 7x7, 7x19 ...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or...

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

Dimensions: .18X.18X12.61

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Made of cadmium plated forged steel per specification MIL-S-5675.

The fork end fittings are manufactured from stainless steel. Also known as strap eyes or strap eye end fittings.Dimensions: .25X.375X1.875

OD ID LENGTH CONDUIT PART NO. 5/16-24 .260 2 7/32 2386 Dimensions: .375X.375X2