Cable Assemblies

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or...

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

Dimensions: .18X.18X12.61

Dimensions: .3125X.3125X.875

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

Made of cadmium plated forged steel per specification MIL-S-5675.

The fork end fittings are manufactured from stainless steel. Also known as strap eyes or strap eye end fittings.Dimensions: .25X.375X1.875

OD ID LENGTH CONDUIT PART NO. 5/16-24 .260 2 7/32 2386 Dimensions: .375X.375X2

Dimensions: .18X.18X2.61

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

These Zinc plated steel terminals are manufactured to AN specifications, with either right-hand or left-hand threads. Example: P/N AN665-10L has a...

The BA3 Series of plain ball end fittings meet all requirements for Boeings BACT14B Plain Ball End Fittings and NAS494 series Plain Ball End Fitti...

These rods ends are machined from 1035 or 1042 carbon steel and cadmium plated. Minimum tensile strength 65,000 PSI. They are inter...

These control cables are pre-stretched for closer tolerance applications and to reduce stretching following installation. The major difference bet...

Nylon construction for external use. Two halves with retaining clip. P/N 05-05500 is 3/4" OD X 3/4" long x 1/2" ID to fit materi...

Made of cadmium plated forged steel per specification MIL-S-5675.

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.