Cable Assemblies

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

Made of cadmium plated forged steel per specification MIL-S-5675.

The fork end fittings are manufactured from stainless steel. Also known as strap eyes or strap eye end fittings.Dimensions: .25X.375X1.875

OD ID LENGTH CONDUIT PART NO. 5/16-24 .260 2 7/32 2386 Dimensions: .375X.375X2

Dimensions: .18X.18X2.61

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The BA3 Series of plain ball end fittings meet all requirements for Boeings BACT14B Plain Ball End Fittings and NAS494 series Plain Ball End Fitti...

These rods ends are machined from 1035 or 1042 carbon steel and cadmium plated. Minimum tensile strength 65,000 PSI. They are inter...

These control cables are pre-stretched for closer tolerance applications and to reduce stretching following installation. The major difference bet...

Nylon construction for external use. Two halves with retaining clip. P/N 05-05500 is 3/4" OD X 3/4" long x 1/2" ID to fit materi...

Made of cadmium plated forged steel per specification MIL-S-5675.

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Nylon Cable Fairlead halves and rings. Construction for external use. Each item sold separately, for complete kit see "Related Items" below.

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

Manufactured of 4130 steel, heat-treated and cadmium plated. Minimum tensile strength 125,000 PSI. For welding to steel tubing or riveting to alum...

Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened a...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...