Cable Assemblies

McFarlane has complete stock of FAA-PMA stabilator cables for the Piper aircraft affected by AD 2013-02-13 (except PA-44) and Piper Service Bull...

These rods ends are machined from 1035 or 1042 carbon steel and cadmium plated. Minimum tensile strength 65,000 PSI. They are inter...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

3/32" 7x7 Black Coated SS Cable 920 Lbs. 1.74 Lbs. per 100. Sold by the foot.

McFarlane Aviation flight control cables offer quality that is second to none in the aircraft industry. Their quality assurance procedures and per...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened a...

The BA3 Series of plain ball end fittings meet all requirements for Boeings BACT14B Plain Ball End Fittings and NAS494 series Plain Ball End Fitti...

NAS1435 Eye Fork Military grade

Made of cadmium plated steel or stainless steel per procurement specification MIL T-5677. Used to form sturdy eye end on control cable. Form cable...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The MS21259 series stud end fittings are manufactured from stainless steel to the strict standards of MS21259. They are certified to the MS21259 s...

The MS21259 series stud end fittings are manufactured from stainless steel to the strict standards of MS21259. They are certified to the MS21259 s...

Injection molded ABS plastic fairings used to cover hole in airframe where control cables emerge such as the rudder cables at ...

Dimensions: .25X.25X.5

Dimensions: .375X.375X4.625

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or...

Made of 303SE Stainless Steel. Used in same manner as AN100 cable thimble.

Nicopress swages Material: Tin