Cable Assemblies

Manufactured of 4130 steel, heat-treated and cadmium plated. Minimum tensile strength 125,000 PSI. For welding to steel tubing or riveting to alum...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

Giga Flight Laser-Markable Arinc 429 Cable GF70-24A429

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

Made of 303SE Stainless Steel. Used in same manner as AN100 cable thimble.

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened a...

Nylon construction for external use. Two halves with retaining clip. P/N 05-05600 is 3/4" OD X 1" long x 1/4" ID to fit material up to...

Dimensions: .312X.312X4.25

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The ACC (Adjustable Cable Connector) provides a strong positive connection with tensioning and maximum linear travel in a confined cable installat...

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

These rods ends are machined from 1035 or 1042 carbon steel and cadmium plated. Minimum tensile strength 65,000 PSI. They are inter...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

These Zinc plated steel terminals are manufactured to AN specifications, with either right-hand or left-hand threads. Example: P/N AN665-10L has a...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...