EGT

This probe is based on a metric 8x1 fine pitch thread such as used on some Rotax engines. It can be used on manifolds that do not have provision...

This probe is based on a metric 8x1 fine pitch thread such as used on some Rotax engines. It can be used on manifolds that do not have provision...

This probe is often used for after market fits and is available in two sizes to suit small and large diamete...

This probe is often used for after market fits and is available in two sizes to suit small and large diamete...

ALCOR 3-1/4 INCH CLAMP EGT/TIT PROBE WITH PLUG UNGROUNDED, .8 OHM, TYPE K Dimensions: 1X3.5X5.5

ALCOR 3-1/4 INCH CLAMP EGT/TIT PROBE WITH PLUG UNGROUNDED, .8 OHM, TYPE K Dimensions: 1X3.5X5.5

ALCOR CLAMP 3-1/4 INCH EGT/TIT PROBE GROUNDED, .70 OHM, TYPE K

ALCOR SCREW-IN EGT/TIT PROBE UNGROUNDED, .71 OHM, TYPE K 7/16

UMA 2-1/4" type K EGT probes. Range: 700-1700F. Made in USA.

UMA 2-1/4" type K EGT probes. Range: 700-1700F. Made in USA.Dimensions: 1X2.25X5

Probe for the measurement of the temperature of exhaust (EGT) for all ROTAX engines. It has a thread metric 8 and it can be installed directly on ...

ALCOR CLAMP 3-1/4 EGT/TIT PROBE GROUNDED, .85 OHM, TYPE K

Alcor 2.35 inch clamp EGT/TIT probe ungrounded, 1.6 ohm, type k. PMA and FAA approved for all reciprocating powered aircraft.

UMA 2-1/4" type K EGT probes. Range: 700-1700F. Made in USA.Dimensions: 1X1X4

Complete extension leads, with connector terminals, for extending CHT or EGT leads up to complete extension leads, with connector terminals, for e...

Complete extension leads, with connector terminals, for extending CHT or EGT leads up to complete extension leads, with connector terminals, for e...

10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...

Probe for the measurement of the temperature of exhaust (EGT) for all ROTAX engines. It has a thread metric 8 and it can be installed directly on ...

10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...

Alcor EGT/TIT Probe Grounded, .70 OHM, Type K 7/16. PMA/FAA approved.Dimensions: 1X2X7

ALCOR EGT/TIT PROBE GROUNDED, .80 OHM, TYPE K 7/16 * All ring terminals and hardware Dimensions: .5X2.5X6

10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...

Probe type clamp "K". Designed for engines ROTAX 447/503/582, you don't need welding. Simply drill the holes and tighten the clamp. Protected ...

ALCOR EGT/TIT PROBE GROUNDED, .70 OHM, TYPE K 7/16 * All ring terminals and hardwareDimensions: .5X4X5