Oil

Cessna Oil Temp Sensor S1630-1 ECCN: EAR99 Weight: 0.12 Pounds Dimensions : 2.25 (L) x 0.8 (W) x 0.85 (H) InchesDimensions: 2X3X3

Cessna Oil Temp Sensor S1630-1 ECCN: EAR99 Weight: 0.12 Pounds Dimensions : 2.25 (L) x 0.8 (W) x 0.85 (H) InchesDimensions: 2X3X3

JPI EDM option, oil press sender with harness.Dimensions: 2X2X3.5

JPI EDM 900 Series P-3 MAP RPM Oil Press Harness 790422

Oil Temp Probe (Lycoming/Continental, single wire) For Lycoming and Continental for use with newer EIS models with software versions beginning w...

Thread sizes: 1/8"-27 NPTF, #10-32 terminals, Common ground through mounting thread, 0-80 psi/0-5 bar range and 240-33.5 Ohms.Dimensions: 3.125X...

Electrical sender (Probe) 3080-37 for cluster-type instrument. 5/8"-18, 10/32 Thread Resistance (Ohms) Note: Used 177-18 Thermistor curve...

Temperature Senders 1/8 NPT Thread Dimensions: .5X2X3

0-100 psi pressure sender. 1/8" NPTF fitting.Dimensions: 3X3.25X4

Probe PN 400509 is a complete assembly using type K thermocouple wire (red/yellow). The sensor port is a standard 5/8-18 thread for bot...

Oil Press Sensor 1/4 NPT 0-150 PSI This sensor is mounted to the pressure line using a 6 inch flexible hose and fittings (not supplied)...

Temperature Senders 1/8 NPT Thread Dimensions: .5X3X5

Oil Temp Probe - For Lycoming and Continental engines for use with older GRT EIS models with software versions beginning with 44S--- or 66S---. Pl...

Secondary Oil Pressure. Includes PT-100GA pressure transducer. This cannot be used as a primary instrument, only secondary. The probes with cables...

1/8 NPT Oil temperature probe for JPI EDM systems. The OIL Temperature (OIL) probe is for all Lycoming and Continental direct drive engines and is...

Sender for 0 - 100 Oil Pressure Gauge, non-TSO.Dimensions: 2.5X2.5X3.5

Rochester 3080-37 Gasket for Temp Probe. 5/8" ID | 7/8" OD