Oil
J.P. Instruments Option Compressor Probe Cdt
The Compressor Discharge Temperature (CDT) probe, is installed just after after the inter-cooler. The probe is installed with a #40 stainless stee...
View full detailsJPI EDM 900 Series P-3 MAP RPM OIL Press Harness 790422
JPI EDM 900 Series P-3 MAP RPM Oil Press Harness 790422
Rochester 3080-37 Replacement OIL Temp Probe 5/8 -18 Thread
Electrical sender (Probe) 3080-37 for cluster-type instrument. 5/8"-18, 10/32 Thread Resistance (Ohms) Note: Used 177-18 Thermistor curve...
View full details1/8 100 PSI Pressure Sender
0-100 psi pressure sender. 1/8" NPTF fitting.Dimensions: 3X3.25X4
JPI OIL Temp Probe 400509 5/8-18
Probe PN 400509 is a complete assembly using type K thermocouple wire (red/yellow). The sensor port is a standard 5/8-18 thread for bot...
View full detailsMitchell Temp Sender 1/8 250F
Temperature Senders 1/8 NPT Thread Dimensions: .5X3X5
GRT OIL Temp Probe FOR LYC AND Cont Engine
Oil Temp Probe - For Lycoming and Continental engines for use with older GRT EIS models with software versions beginning with 44S--- or 66S---. Pl...
View full detailsJPI Option EDM OIL Temp Probe 1/8 NPT 400505LC TSO
1/8 NPT Oil temperature probe for JPI EDM systems. The OIL Temperature (OIL) probe is for all Lycoming and Continental direct drive engines and is...
View full detailsRochester 3080-00037 Gasket 0015-00724
Rochester 3080-37 Gasket for Temp Probe. 5/8" ID | 7/8" OD